Transcription
Printed in China1230-61086-01-D120516R O C K F O R D F O S G AT E . C O M600 South Rockford Drive Tempe, Arizona 85281 United StatesDirect: (480) 967-3565 Toll Free: (800) 669-9899www.rockfordfosgate.com/rftechInstallation assistance available at:Serial Number:Date of Purchase:PMX-3DIGITAL MEDIARECEIVERInstallation & Operation
IntroductionDear Customer,If, after reading your manual, you still have questions regarding thisproduct, we recommend that you see your Rockford Fosgate dealer. If youneed further assistance, you can call us direct at 1-800-669-9899. Be sureto have your serial number, model number and date of purchase availablewhen you call.Congratulations on your purchase of the world’s finest brand ofaudio products. At Rockford Fosgate we are fanatics about musicalreproduction at its best, and we are pleased you chose our product.Through years of engineering expertise, hand craftsmanshipand critical testing procedures, we have created a wide range ofproducts that reproduce music with all the clarity and richness youdeserve.PRACTICE SAFE SOUNDContinuous exposure to sound pressure levels over 100dBmay cause permanent hearing loss. High powered auto soundsystems may produce sound pressure levels well over 130dB.Use common sense and practice safe sound.For maximum performance we recommend you have your newRockford Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we provide specialized training through RockfordTechnical Training Institute (RTTI). Please read your warranty andretain your receipt and original carton for possible future use.SafetyThis symbol with “WARNING” is intendedto alert the user to the presence of importantinstructions. Failure to heed the instructionswill result in severe injury or death.Great product and competent installations are only a piece of thepuzzle when it comes to your system. Make sure that your installeris using 100% authentic installation accessories from RockfordFosgate in your installation. Rockford Fosgate has everything fromRCA cables and speaker wire to power wire and battery connectors. Insist on it! After all, your new system deserves nothing butthe best.This symbol with “CAUTION” is intended toalert the user to the presence of importantinstructions. Failure to heed the instructionscan result in injury or unit damage.To add the finishing touch to your new Rockford Fosgate image,order your Rockford accessories, which include everything fromT-shirts to hats.To prevent injury and damage to the unit, please read and follow the instructions in this manual. We want you to enjoy this system, not get a headache.Visit our web site for the latest information on all Rockfordproducts;www.rockfordfosgate.comor, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all othercountries, call 001-480-967-3565 or FAX 001-480-966-3983.If you feel unsure about installing this system yourself, have it installed by aqualified Rockford Fosgate technician.Before installation, disconnect the battery negative (-) terminal to preventdamage to the unit, fire and/or possible injury.FCC Compliance StatementTable of ContentsThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide more reasonable protection against harmful interferencein a residential installation.2 Introduction3 Specifications4 Design FeaturesOperation is subjected to the following two conditions: (1) This device maynot cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.5 Wiring6 Installation/MountingAUX (Auxiliary Input)This equipment generates, uses, and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, you are encouragedto try to correct the interference by one of the following measures:Bluetooth Reorient or relocate the receiving antenna.Pandora Increase the separation between the equipment and receiver.SiriusXM Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.7-11 OperationSettingsTuner (AM/FM/WB)USB-iPod13 Troubleshooting Consult the dealer or an experienced radio/TV technician for help14-41 French, Spanish, German and Italian44 Limited Warranty Information 2016 Rockford Corporation. All Rights Reserved. PUNCH and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are registered trademarks ownedby Bluetooth SIG, Inc. and any use of such marks by Rockford Corporation is under license. All other trademarks are the property of their respective owners. Specifications subject tochange without notice.“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by thedeveloper to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that theuse of this accessory with iPod or iPhone may affect wireless performance.Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certaincountries. Please visit http://www.pandora.com/legal for more information.Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.2
SpecificationsPMX-3ModelOperating Voltage10.5V - 16VFuse Rating20A25 W X 4 @ 4 Ohms RMS50 W x 4 @ 2 Ohms PeakPower OutputMax. RCA Output Voltage4VOutput Impedance500ΩFrequency Response20 - 20kHzFM Frequency Range87.5MHz - 107.9MHzAM Frequency Range530kHz - 1710kHz162.40 - 162.55WB Frequency Range(US & Canada)Source Presets18 FM / 12 AM / 6 WB / 18 SXMClockNo ClockDisplay2.7” Color TFTBluetooth3.0 EDR, A2DP 1.3USB Compatibility2.032 GB max, 255 Folders max,999 Songs maxUSB CapacityUSB Output1AiPhone 6 PlusiPhone 6iPhone 5SiPhone 5CiPhone 5iPhone 4SiPhone 4iPhone 3GSMade for iPhone Model Names-iPod Touch (5th generation)iPod Touch (4th generation)iPod Nano (7th generation)iPod Nano (6th generation)Made for iPod Model NamesAndroid CompatibilityBluetooth OnlyAudio File CompatibilityMP3, WMAPMX-1R, PMX-0R(3 Remote Limit,100 ft Total Wired Distance)Compatible Wired RemotesCEA 2006Power ratings on Rockford Fosgate source units conform to CEA-2006 industry standards. These guidelines mean your source unit’s output power ratings are REAL POWER numbers, not inflated marketingratings.3
Design FeaturesRotary EncoderREV / FWD buttonThis knob is for adjusting main volume, zone volumes,menu navigation and setting adjustments.Use this button to skip back and forward throughchannels or tracks with a short press. Longpressing will activate manual seek mode.MENU buttonThis button gives you access to the main settings ofthe unit by long pressing. Short pressing will give youaccess to the settings for the active source.PMX-3SRC (Power) ButtonThis button allows you to switch betweensources (short press) and power the unit ONand OFF (long press).SUB ButtonsThese buttons allow you to adjust the subwooferoutput or rear line out UP or DOWN (0-20).DIMMER buttonPressing this button will allow you to select betweenthe two brightness values for the display.PLAY / PAUSE buttonPress this button to play or pause your music. Thisbutton also acts as a MUTE when the source is in AUX& TUNER mode.Fig. 14
Wiring DiagramA SiriusXM Connect Tuner and subscription are required to accessSiriusXM Radio Features (Sold separately). To use the SiriusXM feature,plug the SiriusXM output RCA cables into the AUX input RCA.For vehicles with Steering Wheel Control the use of the PAC SWI-RC orMetra Axxess ASWC-1 interface module is required. When the PAC unit isbeing used, set the radio selection settings for Rockford. If the Metra unitis being used, it settings are automatically set up.(Sold separately)BLACKREVERSE CAMERA TRIGGER INPUT ( )BLACKUSBRADIO ANTENNABLACKRED (REAR LINE OUT RIGHT OR SUB-W OUT)WHITE (REAR LINE OUT LEFT OR SUB-W OUT)GREYRED (FRONT LINE OUT RIGHT)WHITE (FRONT LINE OUT LEFT)REDRED (AUX IN RIGHT)WHITE (AUX IN LEFT)BLACK20AWIRED REMOTE13DIN FEMALEORIENTATIONAASXMB1 2 34 5 67 8 910 11 123 2 16 5 49 8 712 11 10SECTION A-ABBLACKSIRIUS/XM OUTPUTBLACKSIRIUSXM INPUTVIDEO INVIDEO INPURPLE/WHITEPIN E COLORSECTION B-BWIRE DEFINITIONAWG1GREENSPEAKER REAR LEFT ( )202GREEN/BLACKSPEAKER REAR LEFT (-)203ORANGE/WHITEILLUMINATION204WHITESPEAKER FRONT LEFT ( )205WHITE/BLACKSPEAKER FRONT LEFT (-)206REDACC ( 12V)167GREYSPEAKER FRONT RIGHT ( )208GREY/BLACKSPEAKER FRONT RIGHT (-)209BLUE/WHITEREMOTE ( )2010PURPLESPEAKER REAR RIGHT ( )2011PURPLE/BLACKSPEAKER REAR RIGHT (-)2012BLACKGROUND (-)16Fig. 25
Installation / MountingContents Source UnitMounting (Using Mounting Plate) Screws Trim Bezel Power / Speaker Harness Mounting Plate Installation & OperationManual U BracketTo mount the unit, you will need to find a flat surface with adequateclearance behind it that provides enough clearance for the unit and all it’snecessary wiring.1. Once you have determined a mounting location, you will need to cuta circular hole 3” (77mm) in diameter.2. After the hole is cut slide the unit and wiring through the hole.3. Slide the mounting plate over the backside of the unit and secure withthe supplied screws.4. Press on the trim bezel to the front side of the unit.5. Plug in all wiring harnesses and cables. Refer to the wiring diagramfor wire harness connection types.Installation ConsiderationsThe following is a basic list of tools needed for installation: Volt/Ohm meter Heat shrink tubing Wire strippers Soldering iron Wire crimpers Solder Wire cutters Heat gun #2 Phillips screwdriver 7mm wrenchMounting PlateSource Unit Battery post wrench Hand held drill w/ assortedbitsThis section focuses on some of the vehicle considerations for installingyour new source unit. Pre-planning your system layout and best wiringroutes will save installation time. When deciding on the layout of yournew system, be sure that each component will be easily accessible formaking adjustments.PanelTrim BezelMounting ScrewsIf you feel unsure about installing this system yourself, have it installedby a qualified Rockford Audio technician.Mounting PlateFig. 3Before installation, disconnect the battery negative (-) terminal to preventdamage to the unit, fire and/or possible injury.NutsMounting (Using U Bracket)To mountthe Unitunit, you will need to find a flat surface with adequateSourceclearance behind it that provides enough clearance for the unit and all it’snecessaryTrim Bezel wiring.Before beginning any installation, follow these simple rules:1. Be sure to carefully read and understand the instructions beforeattempting to install the unit.2. For safety, disconnect the negative lead from the battery prior tobeginning the installation.3. For easier assembly, we suggest you run all wires prior to mountingyour unit in place.4. Route all of the RCA cables close together and away from any highcurrent wires.5. Use high quality connectors for a reliable installation and to minimizesignal or power loss.6. Think before you drill! Be careful not to cut or drill into gas tanks, fuellines, brake or hydraulic lines, vacuum lines or electrical wiring whenworking on any vehicle.7. Never run wires underneath the vehicle. Running the wires inside thevehicle provides the best protection.8. Avoid running wires over or through sharp edges. Use rubberor plastic grommets to protect any wires routed through metal,especially the firewall.9. ALWAYS protect the battery and electrical system from damage withproper fusing. Install the appropriate fuse holder and fuse on the 12V power wire within 18” (45.7 cm) of the battery terminal.10. When grounding to the chassis of the vehicle, scrape all paint fromthe metal to ensure a good, clean ground connection. Groundingconnections should be as short as possible and always be connectedto metal that is welded to the main body, or chassis, of the vehicle.Seatbelt bolts should never be used for connecting to ground.Bracket1. Once you have determined a mounting location, you will need to cuta circular hole 3” (77mm) in diameter.2. After the hole is cut slide the unit and wiring through the hole.Source Unit3. Take the U bracket and slide over the two studs on the back of thePanelunit. Tighten down with supplied nuts.4.TrimPressBezel on the trim bezel to the front side of the unit.Panel5. Plug in all wiring harnesses and cables.Referto the wiring diagramMountingScrewsfor wire harness connection types.NutsTrim BezelBracketSource UnitPanelFig. 46
SettingsAUX INPUTRENAME – To rename AUX, short press the encoder button to set the firstletter of the new name. Once active, rotate encoder to adjust letters. Shortpress the encoder button again to set the next letter. Repeat until AUX hasbeen renamed. Short press MENU to exit and go back up one level.ENABLE – The PMX-3 comes with SXM enabled, to change to AUX youwill need to short press the encoder button to access options. Rotate theencoder button to select AUX instead of SXM. (SXM AUX)SOURCE GAINTo adjust the level of device input gain, scroll through the inputs (FMTUNER AM TUNER WB TUNER USB AUX BLUETOOTH PANDORA)to the device you want to adjust, short press the encoder button to accessthe gain settings. Rotate the encoder button to set the level of gain. (-3dB -2dB -1dB 0dB 1dB 2dB 3dB)Source Unit SettingsTo access the source unit’s settings, long press the MENU button untilthe options appear. Rotate the encoder to scroll through the list ofsettings and short press the encoder button to select the setting youwish to change. (BALANCE FADER AUDIO VOLTAGE GAUGE BTPAIRING BEEP TUNER REGION SOFTWARE FACTORY DEFAULT)INTERNAL AMPLIFIERShort press to access the INTERNAL AMPLIFIER options. Use the rotaryencoder to select options (ON OFF). When using an amplifier to poweryour speakers, select OFF. If you are powering your speakers directlyfrom the source unit, select the INTERNAL AMPLIFIER to ON.This source unit has a zero current draw when turned off. All of yoursettings and presets will be saved along with your boat’s battery duringstorage.VOLTAGE GAUGETo display the vehicle voltage, short press the encoder button on theVOLTAGE GAUGE option.BALANCEShort press the encoder button to access BALANCE adjustment settings.Rotate the encoder button to set output BALANCE.BT DEVICE PAIRINGShort press the encoder button to access options (DISCOVERABLE DEVICE).FADERShort press the encoder button to access FADER adjustment settings.Rotate the encoder button to set output FADER.DISCOVERABLERotate the encoder button to select if unit is discoverable for pairing.(ENABLE DISABLE) Once enabled, the source unit is now discoverableand ready for pairing to your device. Open the Bluetooth settings on yourdevice to find the source unit labeled “Rockford PMX” and select.AUDIOTo access the AUDIO settings, short press the AUDIO option fromthe MENU screen. Rotate the encoder to scroll through the list ofsettings and short press the encoder button to select the setting youwish to change. (7 BAND EQ CROSSOVER PEQ REAR RCA AUXINPUT SOURCE GAIN INTERNAL AMPLIFIER)DEVICESelecting DEVICE by short pressing the encoder button will allow youto rename the source unit with up to 16 characters. This gives youthe ability to have a unique name for easy identification during devicepairing. Short press the encoder button to select the letter to be changedand rotate the knob to change the value. Repeat process until desiredname is reached.7 BAND EQShort press the encoder button to access the 7 BAND EQ settings. Usethe rotary encoder to scroll through the EQ settings. (FLAT ROCK CLASSIC ACOUSTIC DANCE ELECTRONIC HIP-HOP CUSTOM) When setting up the CUSTOM EQ, short press the encoderbutton to set the first frequency. Once active, rotate the encoder to adjustthe frequency settings. Short press encoder button again to access thenext frequency. Repeat until all EQ settings are complete. Short press theMENU button to exit and go back up one level.BEEPShort press the encoder button to access the BEEP options. Rotate theencoder button to turn system beep ON/ OFF.TUNER REGIONCROSSOVERTo adjust, short press the encoder button to access. Rotate the encoderbutton to select the TUNER REGION of your preference. (EUROPE USA RUSSIA LATIN ASIA JAPAN MIDEAST AUSTRALIA)Short press to access the CROSSOVER settings. Use the rotaryencoder to select the crossover zone options (FRONT REAR SUB).Short press the encoder to adjust the frequency of the crossover(60Hz 80Hz 120Hz APF). Short press MENU to exit and go back upone level.SOFTWAREVERSION - Short press the encoder button to display the currentfirmware version of the unit.REAR RCAUPDATE - Short press the encoder button to update the firmware. Followthe instructions on the screen when updating.Short press to access the REAR RCA options. Use the rotary encoder toselect options (LINE OUT SUBWOOFER).THEMEPUNCH EQTo adjust the THEME, short press the encoder to access the feature.Rotate the encoder button to select the desired THEME (DAY, NIGHT,AUTO)Short press to access the PUNCH EQ settings. Use the rotary encoderto adjust the gain output (0-12). Short press MENU to exit and go backup one level.Punch EQ is an onboard equalizer with up to 18dB @ 45Hz and/or up to 12dB boost at 12.5kHz7
SettingsFACTORY DEFAULTADD PRESETSAUDIO – Short press the encoder button to access. Rotate the encoderbutton to select YES/NO. Selecting YES will reset your unit back tofactory default settings.Short press the encoder button on the ADD PRESETS option. You willneed to be on both the station and PRESET group you want to add first(FM1 FM2 FM3). Using this feature allows you to save stations to theunit. Once selected, use the rotary encoder to select the PRESET number(1-6) you want the station saved to.SYSTEM - Short press the encoder button to access. Rotate the encoderbutton to select YES/NO. Selecting YES will reset your unit back tofactory default settings.REMOVE PRESETSNOTE: Resetting the SYSTEM settings will also reset any SiriusXM userdata.Short press the encoder button on the REMOVE PRESETS option.You will need to be under the PRESET group you want to adjust first(FM1 FM2 FM3). Using this feature allows you to remove savedstations on the unit. Once selected, use the rotary encoder to select thePRESET number (1-6) of the station you want removed.Basic OperationTURNING THE UNIT ON / OFFFMLong press the SRC (Power) button to turn the unit ON or OFFShort press the encoder button to access the FM PRESET options(FM1 FM2 FM3). Using this feature allows you to have separate tunerpreset groups to choose from. Use the rotary encoder button to scrollthrough the TUNER groups and short press to select the group.ADJUSTING THE VOLUMERotate encoder knob left or right to desired volume level (0-40). Thecurrent volume level will be displayed during adjustment.ADJUSTING THE SUBWOOFER OUTPUTAUTO STOREPress the SUB or SUB- buttons to adjust the output level (0-20).Short press the encoder button to access the AUTO STORE function.You will need to be under the PRESET group you want to adjust first(FM1 FM2 FM3). This feature automatically stores presets on the unit.It will stop when presets 1-6 are set. Select the next PRESET group andrepeat to fill next set.ADJUSTING THE SCREEN BRIGHTNESSShort press the SCREEN BRIGHTNESS button to adjust the brightnesslevel. There are two brightness levels.SELECTING A SOURCE TO PLAYLOCALShort press the SRC button to show the different source options (FMTUNER AM TUNER WB TUNER USB AUX BLUETOOTH PANDORA SIRIUSXM). Use the rotary encoder or short press the SRC button to scrollthrough sources.Short press the encoder button to access the LOCAL options. Onceselected, use the rotary encoder to select ON or OFF. The local optiontunes to nearby radio stations with sufficiently strong signals for goodreception. In areas where reception is poor, switching to distance tuningenables the unit to tune in to more distant stations. Distance tuning isthe default.AM BAND SETTINGSTo access the AM BAND SETTINGS, short press the MENU whenusing the AM TUNER source. This will give you access to the settingsspecific to the AM TUNER (AM PRESETS ADD PRESETS REMOVEPRESETS AUTO STORE LOCAL).PRESETSShort press the encoder button to access the PRESETS list. Using thisfeature allows you to see what PRESETS are saved on the unit.ADD PRESETSTuner Operation (FM/AM/WB)Short press the encoder button on the ADD PRESETS option. You willneed to be on both the station and PRESET group you want to add first(AM1 AM2). Using this feature allows you to save stations to the unit.Once selected, use the rotary encoder to select the PRESET number (1-6)you want the station saved to.To operate, use the rotary encoder to select the tuner source you want tolisten to (FM AM WB).To AUTO SEEK stations, short press the FWD and REV buttons. ToMANUAL SEEK stations, long press the FWD and REV buttons to tune tothe desired frequency.REMOVE PRESETSShort press the encoder button on the REMOVE PRESETS option.You will need to be under the PRESET group you want to adjust first(AM1 AM2). Using this feature allows you to remove saved stationson the unit. Once selected, use the rotary encoder to select the PRESETnumber (1-6) of the station you want removed.To MUTE the TUNER, short press the PLAY/PAUSE button.FM BAND SETTINGSTo access the FM BAND SETTINGS, short press the MENU whenusing the FM TUNER source. This will give you access to the settingsspecific to the FM TUNER (FM PRESETS ADD PRESETS REMOVEPRESETS AUTO STORE LOCAL).AMShort press the encoder button to access the FM PRESET options(AM1 AM2). Using this feature allows you to have separate tuner presetgroups to choose from. Use the rotary encoder button to scroll throughthe TUNER groups and short press to select the group.PRESETSShort press the encoder button to access the PRESETS list. Using thisfeature allows you to see what PRESETS are saved on the unit.8
OperationAUTO STOREBROWSERShort press the encoder button to access the AUTO STORE function.You will need to be under the PRESET group you want to adjust first(AM1 AM2). This feature automatically stores presets on the unit. It willstop when presets 1-6 are set. Select the next PRESET group and repeatto fill next set.Short press the encoder button to access the BROWSER options (PLAYLISTS ARTISTS ALBUMS GENRES SONGS COMPOSERS AUDIOBOOKS PODCASTS). Using this feature allows you to search for tracks orsongs by different types of categories.REPEATLOCALShort press the encoder button to access the REPEAT feature options(OFF ONE ALL).Short press the encoder button to access the LOCAL options. Onceselected, use the rotary encoder to select ON or OFF. The local optiontunes to nearby radio stations with sufficiently strong signals for goodreception. In areas where reception is poor, switching to distance tuningenables the unit to tune in to more distant stations. Distance tuning isthe default.SHUFFLEShort press the encoder button to access the SHUFFLE feature options(OFF ALL). This feature allows you to set your preference on shufflingtracks or songs.WB BAND SETTINGSNOTE: When using a USB extension cable, it must be a Rockford Fosgatepowered extension cable. The maximum distance for the cable is 33 feet(10 meters).To access the WB BAND SETTINGS, short press the MENU when usingthe WB TUNER source. This will give you access to the settings specificto the WB TUNER (PRESETS ADD PRESETS REMOVE PRESETS).PRESETSShort press the encoder button to access the PRESETS list. Using thisfeature allows you to see what PRESETS are saved on the unit.ADD PRESETSShort press the encoder button on the ADD PRESETS option. You willneed to be on both the station you want to add first. Using this featureallows you to save stations to the unit. Once selected, use the rotaryencoder to select the PRESET number (1-6) you want the station savedto.REMOVE PRESETSShort press the encoder button on the REMOVE PRESETS option.You will need to be under the PRESET group you want to adjust first(AM1 AM2). Using this feature allows you to remove saved stationson the unit. Once selected, use the rotary encoder to select the PRESETnumber (1-6) of the station you want removed.AUX OperationAfter your device is plugged into the source unit, this feature allowsyou to play music from your device. Select the AUX source option onthe source unit and use your plugged in device to control song/trackselection, play/pause and track skip FWD/REV.Note: AUX is not ON from default, to turn on AUX feature see page 7 forENABLE AUX INPUTUSB (iPod) OperationAfter your device is connected to the source unit, this feature allows youto control playback from your device directly from the unit. Select theUSB source option on the source unit.Bluetooth OperationTo play or pause a song, short press the PLAY/PAUSE button.After your device is paired to the source unit, this feature allows youto control playback from your device directly from the unit. Select theBLUETOOTH source option on the source unit.To skip a track forward, short press the FWD button. To skip a trackbackwards, short press the REV button.To play or pause a song, short press the PLAY/PAUSE button.To access USB specific settings, short press the MENU button for the listof settings (BROWSER REPEAT SHUFFLE). Use the encoder to selectthe option to change.To skip a track forward, short press the FWD button. To skip a trackbackwards, short press the REV button.To access BLUETOOTH specific settings, short press the MENU buttonfor the list of settings (BROWSER REPEAT SHUFFLE). Use the encoderto select the option to change.9
OperationBROWSERSTATIONS MANAGEShort press the encoder button to access the BROWSER options (PLAYLISTS ARTISTS ALBUMS GENRES SONGS COMPOSERS AUDIOBOOKS PODCASTS). Using this feature allows you to search for tracks orsongs by different types of categories.To create stations, short press the encoder button to display yourSTATION MANAGE options (CREATE FROM ARTIST CREATE FROMTRACK CREATE FROM GENRE DELETE). Selecting the CREATE FROMARTIST OPTION allows you to create a station from the artist that you arecurrently listening to. CREATE FROM TRACK works similarly by creatinga station from the current track being played. If you create a station byselecting CREATE FROM GENRE, this will give you music genres toselect from to create your station. Selecting DELETE will delete the nowplaying station.REPEATShort press the encoder button to access the REPEAT feature options(OFF ONE ALL). This feature allows you to set your preference on theamount of times a track or song will repeat.Pandora, the Pandora logo, and the Pandora trade dress are trademarksor registered trademarks of Pandora Media, Inc. Used with permission.Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information.SHUFFLEShort press the encoder button to access the SHUFFLE feature options(OFF ALL). This feature allows you to set your preference on shufflingtracks or songs.SiriusXM Pandora Only SiriusXM brings you more of what you love to listen to, all in oneplace. Get over 140 channels, including commerical-free music plusthe best sports, news, talk, comedy and entertainment. Welcome to theworld of satellite radio. A SiriusXM Connect Tuner and Subscription arerequired. For more information, visit www.siriusxm.comThis feature allows you to control the Pandora app from the source unitdirectly (Android users will have to use Bluetooth only, iOS users canuse both USB and Bluetooth). You will need to start the Pandora app onyour device first, then select the Pandora source option on the sourceunit. To use the “Thumbs Up” feature, long press the SUB button. Touse the “Thumbs down” feature, long press the SUB - button.ACTIVATING YOUR SiriusXM SUBSCRIPTIONAfter installing your SiriusXM Connect Tuner and antenna, power on yoursource unit and select SiriusXM mode. You should be able to hear theSiriusXM Preview channel on Channel 1. If you cannot hear the previewchannels, please check the installation instructions to make sure yourSiriusXM Connect tuner is properly installed.To play or pause a song, short press the PLAY/PAUSE button.To skip a track forward, short press the FWD button.To access Pandora specific settings, short press the MENU button forthe list of settings (STATIONS BOOKMARKS STATIONS MANAGE). Usethe encoder to select the option to change.After you can hear the Preview channel, tune to Channel 0 to findthe Radio ID of your tuner. In addition, the Radio ID is located on thebottom of the SiriusXM Connect Tuner and its packaging. You will needthis number to activate your subscription. Write the number down forreference.STATIONSTo adjust, short press the encoder button to access. Rotate the encoderbutton to select your options (SHUFFLE SORT DATE/A-Z STATIONS).Selecting the SHUFFLE option will shuffle your stations and selecting theSORT feature will sort your stations by date added or alphabetically. Youcan also select your saved stations directly from this list.Note: the SiriusXM Radio ID does not include the letters I, O, S or F.In the USA, you can activate
Bluetooth 3.0 EDR, A2DP 1.3 USB Compatibility 2.0 USB Capacity 32 GB max, 255 Folders max, 999 Songs max USB Output 1A Made for iPhone Model Names-iPhone 6 Plus iPhone 6 iPhone 5S iPhone 5C iPhone 5 iPhone 4S iPhone 4 iPhone 3GS Made for iPod Model Names iPod Touch (5th generatio
