Transcription

Architectural FloodRAF1ConstructionHOUSING is die-cast aluminum, heavy duty, structurally rigid andvibration resistant. Housing is finished charcoal gray using polyester powder coat. Other optional finishes are available.LENS DOOR ASSEMBLY: Minimum 1/8” thick tempered glasslens, thermal and impact resistant, sealed with doorframe andhousing using extruded, memory retentive silicone gasket. Thedoorframe is die-cast aluminum.BASE HOUSING is die-cast ALUMINUM. It is an enclosure forthe electrical components. Housing/lens door assembly is separated by a shaft .Optical SystemOptical system is a precise beam built in PAR lamps of yourchoice. Specular Anodized reflector is provided for the enhancement of the light beam.Electrical ComponentsLAMPHOLDER shall be UL recognized component for the medium base, G8, or GU10 corresponding to match with the lightsource. Medium base lamp holder will be glazed porcelain withspring-loaded center contact, Nickel-plated copper screw shellwith anti-vibration grip. It is rated for 4KV, 600V. Wire leads willbe rated 18AWG, 200º C, and 600V.BALLAST (for HID) shall be UL recognized, high power factorelectronic with reliable lamp starting temperature below –20 F.MountingThe base can be mounted on horizontal (ground, pedestal, orpost) or vertical (wall) surface. The power supply connection canbe made inside the base housing.ListingsUL 1598 and CSA C22.2 NO. 250.0 standards. Suitable forindoor/outdoor wet or damp location use.PreliminaryNorth Star Lighting Inc2150 Parkes Drive, Broadview, Illinois, 60155. Phone: (708) 681-4330; Fax: (708) 681-4006Web Site: www.nslights.com

Architectural FloodRAF2ConstructionHOUSING is die-cast aluminum, heavy duty, structurally rigid andvibration resistant. Housing is finished charcoal gray using polyester powder coat. Other optional finishes are available.LENS DOOR ASSEMBLY: Minimum 1/8” thick tempered glasslens, thermal and impact resistant, sealed with doorframe andhousing using extruded, memory retentive silicone gasket. Thedoorframe is die-cast aluminum.BASE HOUSING is die-cast ALUMINUM. It is an enclosure forthe electrical components. Housing/lens door assembly is separated by a shaft as shown.Optical SystemOptical system is a precise beam built in PAR lamps of yourchoice. Specular Anodized reflector is provided for the enhancement of the light beam.Electrical ComponentsLAMPHOLDER shall be UL Listed component for the medium base, G8 or double contact bayonet base corresponding to match with the light source. Medium base lampholder will be glazed porcelain with spring-loaded centercontact, Nickel-plated copper screw shell with anti-vibrationgrip. It is rated for 4KV, 600V. Wire leads will be rated18AWG, 200º C, and 600V.BALLAST (for HID) shall be Electronic ,high power factor withreliable lamp starting temperature below –20 F for MH.MountingThe base can be mounted on horizontal (ground, pedestal, orpost) or vertical (wall) surface. The power supply connectionshall be made inside the base housing.ListingsUL 1598 and CSA C22.2 NO. 250.0 standards. Suitable forindoor/outdoor wet or damp location use.PreliminaryNorth Star Lighting Inc2150 Parkes Drive, Broadview, Illinois, 60155. Phone: (708) 681-4330; Fax: (708) 681-4006Web Site: www.nslights.comREV-07/24/06

Architectural FloodRAF3ConstructionHOUSING die-cast aluminum, heavy duty,structurally rigid and vibration resistant; charcoal gray, polyester powder coat finish. Otheroptional other finishes are available.LENS DOOR ASSEMBLY: Minimum 1/8” thicktempered glass lens, thermal and impact resistant, sealed with doorframe and housingusing extruded, memory retentive silicone gasket. The door frame is die-cast aluminumOptical SystemOptical system is a one piece precision dieformed aluminum and finished to specularmirror surface ; designed for high performancecontrolled beam and low glare.Electrical ComponentsLAMPHOLDER shall be glazed porcelain mogul base with spring loaded center contact;Nickel plated copper screw shell with antivibration grip. Rated 4KV, 600V.BALLAST shall be high power factor with reliable lamp starting temperature below-40 Ffor HPS and –20 F for MH. Ballast coil windings are copper with class H insulation.MountingPHOTOMETRIC DATARAF3-10031H-MED100W MH Narrow SpotHeavy duty yoke is provided with (2) 0.437 dia.Holes to mount on horizontal or vertical surfacedepending on application. Also sealed typewater resistant cable is provided for the supplyconnections. The cable is rated for outdoor wetor damp location use.ListingsUL 1598 and CSA C22.2 NO. 250.0 standards. Suitablefor indoor/outdoor wet or damp location use.North Star Lighting Inc2150 Parkes Drive, Broadview, Illinois, 60155. Phone: (708) 681-4330; Fax: (708) 681-4006Web Site: www.nslights.comREV-07/24/06

Architectural FloodRAF4ConstructionHOUSING die-cast aluminum, heavy duty,structurally rigid and vibration resistant; charcoal gray, polyester powder coat finish. Otheroptional other finishes are available.LENS DOOR ASSEMBLY: Minimum 1/8”thick tempered glass lens, thermal and impactresistant, sealed with doorframe and housingusing extruded, memory retentive siliconegasket. The door frame is die-cast aluminumOptical SystemOptical system is a one piece precision dieformed aluminum and finished to specularmirror surface ; designed for high performancecontrolled beam and low glare.Electrical ComponentsLAMPHOLDER shall be glazed porcelain mogul base with spring loaded center contact;Nickel plated copper screw shell with antivibration grip. Rated 4KV, 600V.BALLAST shall be high power factor with reliable lamp starting temperature below-40 F for HPS and –20 F for MH. Ballast coil windings are copper with class H insulation.MountingPHOTOMETRIC DATARAF4-231H—MED150W MH Narrow spotHeavy duty yoke is provided with (2) 0.437dia. Holes to mount on horizontal or verticalsurface depending on application. Also sealedtype water resistant cable is provided for thesupply connections. The cable is rated foroutdoor wet or damp location use.ListingsUL 1598 and CSA C22.2 NO 250.0 standards.Suitable for indoor/outdoor wet or damp location use.North Star Lighting Inc2150 Parkes Drive, Broadview, Illinois, 60155. Phone: (708) 681-4330; Fax: (708) 681-4006Web Site: www.nslights.comREV-07/24//06

Architectural FloodRAF5ConstructionHOUSING die-cast aluminum, heavy duty,structurally rigid and vibration resistant; charcoal gray, polyester powder coat finish. Otheroptional other finishes are available.LENS DOOR ASSEMBLY: Minimum 1/8” thicktempered glass lens, thermal and impact resistant, sealed with doorframe and housingusing extruded, memory retentive silicone gasket. The door frame is die-cast aluminumOptical SystemOptical system is a one piece precision dieformed aluminum and finished to specularmirror surface ; designed for high performancecontrolled beam and low glare.Electrical ComponentsLAMPHOLDER shall be glazed porcelain mogul base with spring loaded center contact;Nickel plated copper screw shell with antivibration grip. Rated 4KV, 600V.BALLAST shall be high power factor with reliable lamp starting temperature below-40 Ffor HPS and –20 F for MH. Ballast coil windings are copper with class H insulation.RAF5-631H—400W MH—NarrowMountingHeavy duty yoke is provided with (2) 0.437 dia.Holes to mount on horizontal or vertical surfacedepending on application. Also sealed typewater resistant cable is provided for the supplyconnections. The cable is rated for outdooruse.ListingsUL 1598 and CSA C22.2 NO 250.0 standards.Suitable for indoor/outdoor use.North Star Lighting Inc2150 Parkes Drive, Broadview, Illinois, 60155. Phone: (708) 681-4330; Fax: (708) 681-4006Web Site: www.nslights.comREV-07/24/06

Architectural Flood RAF1 North Star Lighting Inc 2150 Parkes Drive, Broadview, Illinois, 60155. Phone: (708)