Transcription

Gryphon I GBT4400General Purpose HandheldArea Imager Bar Code Readerwith Bluetooth Wireless TechnologyQuick Reference Guide

Datalogic USA Inc.959 Terry StreetEugene, OR 97402U.S.A.Telephone: (541) 683-5700Fax: (541) 345-7140 2010-2017 Datalogic S.p.A. and/or its affiliatesAn Unpublished Work - All rights reserved. No part of the contentsof this documentation or the procedures described therein may bereproduced or transmitted in any form or by any means withoutprior written permission of Datalogic USA Inc. or its subsidiaries oraffiliates (“Datalogic” or “Datalogic USA”).Owners of Datalogic products are hereby granted a non-exclusive,revocable license to reproduce and transmit this documentationfor the purchaser's own internal business purposes. Purchasershall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensurethat all notices appear on any reproductions of the documentation.Should future revisions of this manual be published, you canacquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from theDatalogic website (www.datalogic.com) or provided on appropriatemedia. If you visit our website and would like to make commentsor suggestions about this or other Datalogic publications, pleaselet us know via the "Contact Datalogic" pageDisclaimerDatalogic has taken reasonable measures to provide informationin this manual that is complete and accurate, however, Datalogicreserves the right to change any specification at any time withoutprior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. andthe E.U.Gryphon is a trademark of Datalogic S.p.A. and/or its affiliatesregistered in the U.S.The Bluetooth word mark and logos are owned by Bluetooth SIG,Inc. and any use of such marks by Datalogic Group companies isunder license. All other brand and product names may be trademarks of their respective ownersPatentsSee www.patents.datalogic.com for patent list.See the Regulatory Addendum includedwith your product for additional regulatory, safety and legal information.

Table of ContentsEND USER SOFTWARE LICENSE AGREEMENT (EULA) . iiiSoftware Product Policy . viDescription . 1Setting Up the Reader . 2Positioning the Base Station . 3Connecting the Base Station . 6Securing the DC Power Cord (Optional) . 6System and Network Layout . 9Typical Setup with Cradle and Host . 9Using the BC40xx Radio Base . 10Radio Base LEDs . 10Cleaning Procedure . 11Cleaning plastic surfaces . 11Cleaning electrical contact surfaces . 12Charging the Batteries . 14Battery Safety . 14Replacing the Batteries . 17Using the Gryphon I GBT4400 . 19Linking the Reader . 20Link Datalogic RF Devices to Base. 20Link Scanner to Bluetooth Adapter . 20Power Off . 21Selecting the Interface Type . 21Interface Selection . 21Configuring the Interface . 21Keyboard Interface . 24Scancode Tables. 26Country Mode . 26Caps Lock State. 31Numlock. 32Programming . 33Using Programming Bar Codes . 33Configure Other Settings . 33Resetting Standard Product Defaults . 33Reading Parameters . 34Aiming System Control . 34Good Read Green Spot Duration . 35Scan Modes . 36Pick Mode . 38Multiple Labels in a Volume . 38Technical Specifications . 39LED and Beeper Indications . 43Quick Reference Guidei

Base Station Indications .45Datalogic Limited Factory Warranty . 46Ergonomic Recommendations . 48Support Through the Website . 49iiGryphon BT4400

DATALOGIC IP TECH S.R.L.END USER SOFTWARE LICENSE AGREEMENT (EULA)FOR THE GRYPHON GBT44XXNotice to End User: There are two types of software covered by this END USERLICENSE AGREEMENT ("EULA"): (1) The Datalogic Product you have acquired contains embedded software ("Embedded Software") which is integral to the Product'soperation; and (2) Optional Application Software provided to you on an optionalbasis ("Application Software"). Embedded Software and Application Software arecollectively referred to as "Software" and are subject to the terms and conditionscontained in this EULA. Software is provided only for use with, and for authorizedend users of, the Datalogic Gryphon GBT44XX. Portions of the Embedded Softwareinclude or operate with Open Source software or libraries ("Open Source"). Use ofOpen Source is subject to the Open Source licenses available at the following website: http://www.datalogic.com/oss.This EULA (End User Software License Agreement) ("EULA” or "Agreement") is alegally binding agreement governing the licensing of the Software and Documentation by Datalogic IP Tech S.r.l. and its subsidiaries and affiliates ("Datalogic") to theentity or person who has purchased or otherwise acquired a Datalogic Product ("EndUser"). For purposes of this Agreement, any software that is not Embedded Software or Application Software is software associated with a separate end-userlicense agreement is licensed to you under the terms of that license agreement.Datalogic and End User hereby agree as follows:1. Definitions.1.11.21.31.41.5"Affiliate" means a business entity currently existing or later acquired thatis controlled by, or is under common control with Datalogic S.p.A."Documentation" means materials such as user's guides, program referenceguides, quick reference guides, manuals, or similar materials associatedwith or related to the Datalogic Product, whether in printed, "online", orother form."Proprietary Information" means: (a) source code, object code, software,documentation, and any related internal design, system design, data basedesign, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any othertrade secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, shouldrecognize as confidential. Proprietary Information does not include anyinformation that the receiving party can establish was (1) in the publicdomain, (2) already in the receiving party's possession or rightfully knownprior to receipt, (3) rightfully learned from a third party not in violation ofany other's proprietary rights, or (4) independently developed withoutaccess to Proprietary Information."Datalogic Product" means the Datalogic Gryphon GBT44XX series scannerproduct, including all embedded Software in and all Documentation relatedto such product, which has been purchased or otherwise acquired by EndUser, whether obtained directly or indirectly from Datalogic."Software" means any software or computer programs of Datalogic or itsthird party licensors in machine readable form which is embedded in theDatalogic Product, whether obtained directly or indirectly from Datalogic,including any replacement, update, upgrade, enhancement or modification.2. Scope Of License Granted.2.12.2Datalogic grants to End User a personal non-exclusive, non-transferable,perpetual license to use the Software, solely on the Datalogic Product inwhich it is embedded ("designated Datalogic Product"), in machine-readableform only, solely for End User's internal business purposes. This Agreementdoes not convey ownership of the Software to End User. Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this Agreement, the term"purchase" or its equivalents when applied to the Software shall mean"acquire under license." End User is not entitled to receipt or use of thesource code to any Software.End User shall not copy, modify, decompile, disassemble, reverse engineer,or otherwise reproduce or remanufacture the Software, whether modifiedor unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes other than as expressly provided in this Agreement, withoutDatalogic's prior written consent.Quick Reference Guideiii

3. Transfers, Support.3.13.23.3Any copying, installing, reproduction, remanufacture, reverse engineering,electronic transfer, or other use of the Software on other than the designated Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the grantedlicenses, but instead may elect to notify End User that End User is deemedto have ordered and accepted a license for each breaching use. End Usershall pay Datalogic the applicable list price for such licenses as of the dateof such breach.End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such thirdparty agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absentsuch agreement shall be null and void.End User may obtain support for Software from Datalogic at Datalogic'sstandard support fees and under Datalogic's standard support terms andconditions in effect at the time the support is requested.4. Intellectual Property.End User acknowledges that the Software comprises valuable trade secrets ofDatalogic or Datalogic's third party licensors and that the Software is protected byUnited States copyright law and trade secret law, and by all applicable internationalintellectual property laws and treaty provisions. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third partylicensors' copyrights, patents, trademarks, service marks, trade secrets, or otherintellectual property rights and End User shall have no right to commence any legalactions to obtain such rights. End User shall not remove, modify, or take any otheraction that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the Datalogic Product.5. Proprietary Information.5.15.25.3End User acknowledges that Proprietary Information is the confidential,proprietary, and trade secret property of Datalogic and Datalogic's thirdparty licensors and End User acquires no right or interest in any ProprietaryInformation.End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any personother than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Information other than in conjunction with use of the Datalogic Product exclusivelyfor End User's internal business purposes. End User shall take steps to protect the Proprietary Information no less securely than if it were End User'sown intellectual property.The provisions of this Proprietary Information Section shall survive andcontinue for five (5) years after the termination of this Agreement.6. Limited Warranty.6.16.2ivDatalogic warrants that, under normal use and operation, the DatalogicProduct will conform substantially to the applicable Documentation for theperiod specified in the Documentation. During this period, for all reproducible non-conformities for which Datalogic has been given written notice,Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End User agrees to supply Datalogic with all reasonably requested information and assistance necessary to help Datalogicin remedying such nonconformities. For all defects reported to Datalogicwithin the warranty period, Datalogic's liability is limited to providing EndUser with one copy of corrections or responding to End User's problemreports according to Datalogic's standard assistance practices. Datalogicdoes not warrant that the product will meet End User's requirements orthat use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any product that have been subjected to damage orabuse, whether intentionally, accidentally, or by neglect, or to unauthorizedrepair or unauthorized installation, and shall be void if End User modifiesthe product, uses the product in any manner other than as established inthe Documentation, or if End User breaches any of the provisions of thisAgreement.EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT ISPROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND,EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.Gryphon GBT4400

7. Infringement.To the maximum extent permitted by law, End User agrees to defend, indemnifyand hold harmless Datalogic, its affiliates and their respective directors, officers,employees and agents from and against any and all claims, actions, suits or proceedings, as well as any and all losses, liabilities, damages, costs and expenses(including reasonable attorney’s fees) arising out of or accruing from (a) the EndUser’s use of Software, (b) any application the End User develops on the Softwarethat infringes any Intellectual Property Rights of any person or defames any person or violates their rights of publicity or privacy, and (c) any non-compliance bythe End User of this Agreement.8. Limitation Of Liability.DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANYOTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE ORFEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FORLOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANYOTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE,EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES.9. Government Restricted Rights; International Use.9.19.2Use, duplication, or disclosure of the Software by the U.S. Government issubject to the restrictions for computer software developed at privateexpense as set forth in the U.S. Federal Acquisition Regulations at FAR52.227-14(g), or 52.227-19 or in the Rights in Technical Data and ComputerSoftware clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.If End User is using the Datalogic Product outside of the United States, EndUser must comply with the applicable local laws of the country in which theDatalogic Product is used, with U.S. export control laws, and with theEnglish language version of this Agreement. The provisions of the "UnitedNations Convention on International Sale of Goods" shall not apply to thisAgreement.10. Termination.10.110.2Either party may terminate this Agreement or any license granted underthis Agreement at any time upon written notice if the other party breachesany provision of this Agreement.Upon termination of this Agreement, End User immediately shall ceaseusing any nonembedded software and shall return to Datalogic or destroyall nonembedded software covered by this Agreement, and shall furnishDatalogic with a certificate of compliance with this provision signed by anofficer or authorized representative of End User. For embedded software,End User agrees to sign a waiver prepared by Datalogic concerning furtheruse of the embedded Software. End User's resumed or continued use of theembedded Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for suchuse.11. General Provisions.11.111.211.311.4Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software andsupersedes all prior or contemporaneous agreements, written or oral,between the parties concerning the licensing of the Software. This Agreement may not be changed, amended, or modified except by written document signed by Datalogic.Notice. All notices required or authorized under this Agreement shall begiven in writing, and shall be effective when received, with evidence ofreceipt. Notices to Datalogic shall be sent to the attention of Datalogic IPTech S.r.l., Legal & IP Department, Via San Vitalino 13, 40012 Calderara diReno (Bologna), Italy or such other address as may be specified by Datalogicin writing.Waiver. A party's failure to enforce any of the terms and conditions of thisAgreement shall not prevent the party's later enforcement of such termsand conditions.Governing Law; Venue: Both parties agree to the application of the laws ofthe country in which End User obtained the license to govern, interpret, andenforce all of End User’s and Datalogic’s respective rights, duties, and obligations arising from, or relating in any manner to, the subject matter of thisAgreement, without regard to conflict of law principles. The United NationsQuick Reference Guidev

Software Product Policy11.5Convention on Contracts for the International Sale of Goods does not apply.All rights, duties, and obligations are subject to the courts of the country inwhich End User obtained the license. For licenses granted by Licensee whooperates in the countries specified below, the following terms applies.For Americas.This Agreement is governed by the laws of the State of Oregon. This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of Oregon U.S.A, withoutregard to the rules governing conflicts of law. The state or federal courts ofthe State of Oregon located in either Multnomah or Lane counties shallhave exclusive jurisdiction over all matters regarding this Agreement,except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory inwhich End User resides, or in which any of End User's assets are located. Inthe event an action is brought to enforce the terms and conditions of thisAgreement, the prevailing party shall be entitled to reasonable attorneys’fees, both at trial and on appeal.For Europe, Middle East and AfricaThis Agreement is governed by the laws of Italy. This Agreement and therights of the parties hereunder shall be governed by and construed inaccordance with the laws of Italy, without regard to the rules governingconflicts of law. Italian Court of Bologna shall have exclusive jurisdictionover all matters regarding this Agreement, except that Datalogic shall havethe right, at its absolute discretion, to initiate proceedings in the courts ofany other state, country, or territory in which End User resides, or in whichany of End User's assets are located. In the event an action is brought toenforce the terms and conditions of this Agreement, the prevailing partyshall be entitled to reasonable attorneys’ fees, both at trial and on appeal.For Asia- Pacific CountriesThis Agreement is governed by the laws of the State of Hong Kong. ThisAgreement and the rights of the parties hereunder shall be governed byand construed in accordance with the laws of the State of Hong Kong without regard to the rules governing conflicts of law. The Court of Hong Kongshall have exclusive jurisdiction over all matters regarding this Agreement,except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory inwhich End User resides, or in which any of End User's assets are located. Inthe event an action is brought to enforce the terms and conditions of thisAgreement, the prevailing party shall be entitled to reasonable attorneys’fees, both at trial and on appeal.Attorneys' Fees. In the event an action is brought to enforce the terms andconditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.- END -Software Product PolicyDatalogic reserves the right to ship its products with the latest versionof software/firmware available. This provides our customers with thevery latest in Datalogic software technology.The only exception to this policy is when the buyer has a signed contractwith Datalogic that clearly defines the terms and conditions for makingsoftware/firmware changes in products shipped to the buyer.To arrange for a Software Maintenance and Support Agreement pleasecontact your Datalogic sales person.viGryphon GBT4400

Gryphon I GBT4400DescriptionWith rich feature sets and extensive options, the Gryphon product series from Datalogic represents the premium level ofdata collection equipment for general purpose applications.The Gryphon GBT4400 readers have enhanced optics withimproved motion tolerance allowing codes placed on fastmoving objects to be easily and quickly captured, creating theideal reader for tasks requiring high throughput like thosefound in retail and light industrial environments.OmniDirectionalOperationTo read a symbol or capture an image, simply aimthe reader and pull the trigger. The Gryphon IGBT4400 is a powerful omni-directional reader, sothe orientation of the symbol is not important.Datalogic’s exclusive patented ‘Green Spot’ forgood-read feedback helps to improve productivityin noisy environments or in situations wheresilence is required. When using the product withthe cradle at a 45 position, the Green Spot canwork as an aiming system to aid in positioning thebar code for quick and intuitive reading.DecodingReliably decodes all standard 1D (linear) and 2Dbar codes, including GS1 DataBar linear codes,Postal Codes (China Post), Stacked Codes (such asGS1 DataBar Expanded Stacked, GS1 DataBarStacked, GS1 DataBar, Stacked Omnidirectional).The data stream — acquired from decoding asymbol — is rapidly sent to the host. The reader isimmediately available to read another symbol.ImagingThe Gryphon I GBT4400 can also function as acamera by capturing entire images or image portions of labels, signatures, and other items.Quick Reference Guide1

Setting Up the ReaderSetting Up the ReaderFollow the steps below to connect and get your reader up andcommunicating with its host.1. Configure the Base Station starting on this page.2.Charge the Batteries (see page 14).3.Link to the Base Station (see page 20).4.Select the Interface Type (see page 21).5.Configure the Reader starting on page 33 (optional,depends on settings needed).NOTE2According to recent modification of Regulationfor shipping Li-Ion based battery packs, theproducts and their spare battery packs partsare shipped with a very low residual charge(low state of charge).Hence the needs* that a new product must be fully rechargedbefore starting to use it.and* that battery packs of the stocked productsGBT/GM44 and spare battery pack parts mustbe periodically recharged : for instance byusing a BC40xx cradle powered up with a 12VDatalogic AC/DC adapter (cod.8-0935) for atleast 30 minutes each 3 months.Gryphon GBT4400

Positioning the Base StationPositioning the Base StationThe base station/charger may be set up in desk application tohold the reader in three different positions, either a horizontalor standing or vertical position, in order to provide the mostcomfortable use depending on the needs.Base Station Positions and related clips to be usedFigure 1- Horizontal PositionThis position is preferred, unless a different specific positioning is required, for its outmost ease of insertion as well as theminimum effort and attention required to customer whendocking the scanner.Figure 2- Standing PositionThis position is preferred if the scanner is to be used in standmode and not needed to be often removed from base station.Quick Reference Guide3

Positioning the Base StationFigure 3 - Vertical PositionThis position is preferred when lack of room on the desktoprecommends the scanner to be left vertical during recharging.1.Insert the appropriate parts for the desired base station position.2.Using your thumbs, push open the plastic tabs on thebottom of the base to free the wing holders.TabTab4Gryphon GBT4400

Positioning the Base StationTo ensure best contact and performance, donot intermix the parts of the two differentmount sets.CAUTION3.The stand can now be repositioned in either horizontalor standing position.HorizontalStandingQuick Reference Guide5

Connecting the Base StationConnecting the Base StationFigure 4 on page 6 shows how to connect the Base Station toa terminal, PC or other host device. Turn off the host beforeconnection and consult the manual for that equipment (ifnecessary) before proceeding. Connect the interface cablebefore applying power to the Base Station.NOTEThe Gryphon GBT44XX can also be Powered bythe Terminal. When powered by the Terminal,the battery charger is automatically set as Slowcharge.For some specific interfaces or hosts or lengthsof cable, the use of an external power supplymay be recommended for full recharging capability (see "Technical Specifications" on page 39for more details).Base Station Connection and Routing — Fully insert the PowerCable and Interface (I/F) Cable connectors into their respective ports in the underside of the Base Station (see Figure 4).Then connect to an AC Adapter, and plug the AC power cordinto the (wall) outlet.Figure 4. Connecting the Base StationWall plugConnectorI/F CableAC/DCAdapterDC PowerCordBaseStationSecuring the DC Power Cord (Optional)The DC power cord for the adapter can be secured to the bottom of the base in order to maximize the mechanical retention of the cable itself. The routing of the power cord can bechanged to accommodate base station positioning: horizon-6Gryphon GBT4400

Connecting the Base Stationtal, stand or wall mount. The cables can be looped around tothe front of the Base Station, or fed directly out the back ofthe Base Station, as shown in Figure 5.Figure 5. Options for routing the DC cordPlease refer to the arrows depicted on the bottom of the basewhen placing the cables, detailed in Figure 6.Figure 6. Arrows showing routingQuick Reference Guide7

Connecting the Base StationHost Connection — Verify before connection that the reader’scable type is compatible with your host equipment.NOTEThe Gryphon I GBT4400 can be set up to requirea PIN code when connecting to the host. If youare adding new equipment to a system thatuses a custom security PIN, please see the PRGfor information before proceeding.Most connections plug directly into the host device as shownin Figure 7. Keyboard Wedge interface cables have a ‘Y’ connection where its female end mates with the male end of thecable from the keyboard and the remaining end at the keyboard port on the terminal/PC.BFigure 7. Connecting to the HostWaKe Wor.ndUSybed oardgor. eMor.IBPower Connection — Plug the AC Adapter into an approved ACwall socket with the cable facing downwards (as shown inFigure 4) to prevent undue strain on the socket.Disconnecting the Cable — To detach the cable, insert a paperclip or similar object into the hole on the base, as shown.Figure 8. Disconnecting the CableInsertPaper Clip8Gryphon GBT4400

Connecting the Base StationSystem and Network LayoutTypical Setup with Cradle and HostFigure 9. Reader LayoutQuick Reference Guide9

Connecting the Base StationUsing the BC40xx Radio BaseRadio Base LEDsLEDs on the Gryphon Base provide information about theBase as well as battery charging status, as shown inFigure 10.Figure 10. Gryphon Base LEDsYELLOW LEDBUTTONRED LED —GREEN LEDTable 1. Radio Base LEDsLEDSTATUSPower on /DataYellow On Base is poweredYellow Blinking Base re

Datalogic USA Inc. 959 Terry Street Eugene, OR 97402 U.S.A. Telephone: (541) 683-5700 Fax: (541) 3